|







|
|
Publication List
Click to view:
Refereed Journal Papers
-
Tata, U., Huang H., Chiao, J.C., and Carter, R., “Exploiting patch
antenna for strain measurement”, submitted to Measurement Science
and Technology
-
Majumdar, A. and Huang, H., “A compact refractive index sensor using
an optical fiber with a polymer core”, submitted to Optics
Letters
-
Huang, H., Pamphile, T., and Derriso, M., “An experimental study on
the directionality of Lamb wave displacements generated by
piezoelectric patches”, submitted to Ultrasonics
-
Huang, H., Majumdar, A., & Cho, J., "Fabrication and evaluation of
hybrid silica/polymer optical fiber sensors for large strain
measurement", accepted, Trans. Inst. measurement and Control,
Intelligent Fault Diagnosis & Prognosis for Engineering Systems
Special issue
-
Huang, H., Pamphile, T., and Derriso, M., 2008, “Effect of bending
dynamics of piezoelectric patch actuator on Lamb wave displacement
field”, Smart Materials and Structures, v17, p055012
PDF
-
Majumdar, A. & Huang, H., 2008, “Development of an in-fiber
whitelight interferometric distance sensor for absolute measurement
of arbitrary small distances”, Applied Optics, v47, n15,
p2821-2828
PDF
-
Huang, H. & Tata, U., 2008, “Simulation, implementation, and
analysis of an optical fiber bundle distance sensor with single mode
illumination”, Applied Optics, v47, n9, p1302-1309
PDF
-
Huang, H. & Kardomateas, G. A., “Dislocation-based boundary element
method for crack problems in anisotropic half planes”, AIAA
Journal, v42, n3, March 2004, p650-657
-
Kardomateas, G. A. & Huang, H., “The initial post-buckling behavior
of face-sheet delaminations in sandwich composites”, Journal of
Applied Mechanics, Transactions ASME, v70, n2, March 2003,
p191-199
-
Huang, H. & Kardomateas, G. A., “Buckling and initial post-bucking
behavior of sandwich beams including transverse shear”, AIAA
Journal, v40, n11, November 2002, p2331-2335
-
Huang, H. & Kardomateas, G. A., “Stress intensity factors for a
mixed mode center crack in an anisotropic strip”, International
Journal of Fracture, v108, n4, April 2001, p367-381
-
Huang, H. & Kardomateas, G. A., “Mixed-mode stress intensity factors
for cracks located at or parallel to the interface in bi-Material
halfplanes”, International Journal of Solids & Structures,
v38, n21, May 2001, p3719-3734
-
Huang, H. & Kardomateas, G. A., “single-edge and double-edge cracks
in a fully anisotropic strip”, Journal of Engineering Materials
and Technology, ASME Special Issue, v121, n4, October 1999,
p422-429
-
La Saponara, V., Huang, H., & Kardomateas, G. A., “crack branching
off an interface between anisotropic thin strips”, ASME,
Materials Division, v86, November 1999, p115-123
-
Huang, H. & Kardomateas, G. A., “Post-buckling analysis of multiply
delaminated composite plates”, Journal of Applied Mechanics, ASME,
December 1997, p842-846
Go to the Top
Representative
Conference Papers
1.
Huang, H., Pamphile, T. and Derriso, M., "Effect of bending dynamics of
piezoelectric patch actuator on Lamb wave displacement field",
to be presented at the ASME International Mechanical Engineering
Congress and Exposition, Boston, Massachusetts, Oct. 31-Nov. 6, 2008
2.
Tata, U., Huang H., Chiao, J.C., and Carter, R., "Bio-inspired
sensor skins for structural health monitoring", to be presented at the
ASME Conference on Smart Materials, Adaptive Structures and Intelligent
Systems, SMASIS2008, Ellicott City, Maryland , Oct. 28-30, 2008
3.
Gupta, N. and Huang, H., "Development of an optical fiber
corrosion sensors based on light reflection", invited paper, the Fourth
International Conference on Bridge Maintenance, Safety, and Management,
Seoul, Korean, July 13-17, 2008
4.
Huang, H., Pamphile, T., and Derriso, M, “Signal processing for
lamb wave signals excited by piezoelectric patches”, Sensor, Signal, and
Information Processing (Sensip) workshop, Sedona, Arizona, May 11-14,
2008
6.
Huang, H., Majumdar, A., “Development of an in-fiber whitelight
interferometric distance sensor for small distance measurement”, NSF
CMII grantee’s conference, Knoxville, TN, January, 2008
7.
Huang, H., Tata, U., Majumdar, A., “A novel all-fiber surface
roughness sensor based on laser scattering”, The 6th International
Workshop on Structural Health Monitoring, Stanford University, September
2007
8.
Huang, H., “Course material development for a graduate course on
structural health monitoring”, invited talk, World Forum on Smart
Materials & Smart Structure Technology, Chongqing, China, May 2007
Go to the Top
US
Patents
-
US patent
application, “Passive wireless sensor for strain, temperature,
crack, and fatigue measurement”, February 2008
-
US patent
application, “Reflectance sensor for strain, corrosion, and fatigue
detection”, May 2008
-
US patent #8187816, “In-fiber Whitelight Interferometry Using
Long-Period Fiber Grating”
-
US patent #6717659, “Method and Apparatus for
Detecting Airlines in Optical Fibers”
-
US patent #6791678, “System and Method for
Obtaining Spin and Mechanical Twist Data during Optical Fiber Draw”
Go to the Top
|